Studi Literatur Analisis Keandalan Komponen Industri dan Penerbangan

Sherly Hutri Permatasari; Hadi  Pranoto

doi:10.31539/ywvgzn63

Authors

Sherly Hutri Permatasari Universitas Mercu Buana
Hadi Pranoto Universitas Mercu Buana, Jakarta

DOI:

https://doi.org/10.31539/ywvgzn63

Abstract

Abstract: This study aims to map the analysis methodologies and the main triggers of technical component failure in the mechanical systems of the manufacturing and aviation industries. The method used is a Systematic Literature Review focusing on analysis parameters from Weibull distribution, Failure Mode and Effects Analysis (FMEA), Fault Tree Analysis (FTA), and Reliability-Centered Maintenance (RCM). The results of the study indicate that the majority of critical devices, especially hydraulic systems and actuators, have entered the wear-out phase. This is statistically proven through Weibull distribution parameters that are consistently above one (β > 1) with a contrasting priority where aviation prioritizes regulatory safety (MEL) while manufacturing focuses on cost efficiency. In conclusion, determining an accurate Mean Time to Failure (MTTF) is key to maintaining system integrity while reducing operational expenses in both sectors.

Keywords: Component Reliability, Mean Time to Failure, Root Cause Analysis, Systematic Literature Review, Weibull Distribution

References

Alrasid, H., Arifin, M., & Sakti, A. (2023). Analisis Keandalan Skin Air Outlet Valve 22HQ pada Pesawat Airbus 320 di Maskapai BBB. Jurnal Teknologi Kedirgantaraan, 8(2). https://doi.org/10.35894/jtk.v8i2.85

Arsyi Ammar, D., Esthi Riyanti, L., & Herwanto, D. (2024). Analysis of Reliability Pressure Regulated Valve Engine Rolls Royce Trent 700 on Airbus 330-300/200. International Journal of Progressive Sciences and Technologies (IJPSAT, 42(2), 659–670. https://doi.org/http://dx.doi.org/10.52155/ijpsat.v42.2.5954

Bimantara, B., Lilies Esthi Riyanti, & Dody Herdianto. (2026). Analisis Kegagalan Brake Servo Valve Hydraulic System Blue pada Main Landing Gear Pesawat Airbus A330 dengan Metode FMEA dan FTA di PT. GMF AeroAsia,Tbk. Jurnal Teknik Mesin, Elektro Dan Ilmu Komputer, 6(1), 98–117. https://doi.org/10.55606/teknik.v6i1.8651

Candra, A. (2022). Analisa Reliability Centered Maintenance (RCM) Mesin Sablon Digital. Tekmapro, 17(2), 37–48. https://doi.org/10.33005/tekmapro.v17i2.294

Fadli, R., Jufrizel, J., & Hastuti, W. P. (2020). Analisa Sistem Instrumentasi dan Keandalan Boiler dengan Metode Fault Tree Analysis (FTA) dan Metode Failure Mode and Effect Analysis (FMEA). El Sains : Jurnal Elektro, 2(2), 17–22. https://doi.org/10.30996/elsains.v2i2.4768

Furqon, Hilman Taufik, Ego Widoro, Nugroho Budi, Nurdin, Kurniawan, & Tia Dikatama Tsania. (2025). Analisis Keandalan Fuel Control Unit P/N 441921-5 pada APU Honeywel GTCP131-9 (A) Pesawat Airbus 320 - 200 di PT Indonesia Air Asia. Jurnal TNI Angkatan Udara, 4(4). https://doi.org/10.62828/jpb.v4i4.180

Ghufra Alhambali, A., Puji Hastuti, W., & Jufrizel. (2022). Analisis Keandalan Mesin Mechanical Conveyor Menggunakan Metode Failure Mode and Effect Analysis. Jurnal Elsains, 4. https://doi.org/https://doi.org/10.30996/elsains.v4i2.7505

Hidayaturrohman, N., Studi, P., Mesin, T., Tunggal, G., Zohari, A., Eng, M., & Masykur, K. (2021). Analisis Keandalan Komponen Kritis Pada Mesin Auto Trimming DAT-18 di Departemen Inspection PT A. JURNAL ILMU TEKNIK MESIN, 1(1), 1–8. https://jitm.poltek-gt.ac.id/index.php/ejournal/id/article/view/2

Marpaung, S. B., Ritonga, D. A. A., & Irwan, A. (2021). Analisa Risk Priority Number (RPN) Terhadap Keandalan Komponen Mesin Thresher Dengan Menggunakan Metode FMEA di PT.XYZ. JiTEKH, 9(2), 74–81. https://doi.org/10.35447/jitekh.v9i2.427

Muhammad Rafi’i, Mad Yusup, Purbawati Purbawati, Ida Rosanti, & Diyaa Aaisyah Salmaa Putri Atmaja. (2025). Analisis Kerusakan Komponen Sistem Power Train Menggunakan Root Cause Failure Analysis (RCFA) pada PT. Cipta Kridatama Samarinda. Venus: Jurnal Publikasi Rumpun Ilmu Teknik , 3(4), 162–174. https://doi.org/10.61132/venus.v3i4.1057

Mulyani, S., & Priyahapsara, I. (2023). Keandalan Komponen Nose Wheel Assy pada Pesawat Cessna. Quantum Teknika : Jurnal Teknik Mesin Terapan, 4(2), 69–74. https://doi.org/10.18196/jqt.v4i2.16357

Nadhira Nur Azizah, Feti Fatonah, & Djoko Herwanto. (2026). Analisis Akar Penyebab Kegagalan Twin Motor Actuator pada Fuel System P/N FRH010041 Pesawat Airbus 330 Series di PT GMF AeroAsia, Tbk. Jurnal Teknik Mesin, Elektro Dan Ilmu Komputer, 6(1), 78–97. https://doi.org/10.55606/teknik.v6i1.8579

Naufal, M., Fitriani, R., & Sumitra, N. R. (2026). Analisis keandalan mesin roll menggunakan MTBF dan MTTR pada PT XYZ Karawang. Jurnal Terapan Teknik Industri, 7(2), 421–434. https://doi.org/10.37373/jenius.v7i2.2252

Nisa, K. S., Melyna, E., Maulana, M. I., & Ridwan, M. A. A. (2023). Perbaikan Kualitas Produksi dengan Metode Failure Mode and Effect Analysis (FMEA) di PT. ABC. Journal of Community Services in Sustainability, 1(1), 37–46. https://doi.org/10.52330/jocss.v1i1.139

Nur, S., & Isranuri, I. (2021). Analisa Keandalan Mesin Screw Press Berdasarkan Identifikasi Kegagalan Failure Mode And Effect Analysis Dan Root Cause Analysis. DINAMIS, 9(2), 12–21. https://doi.org/10.32734/dinamis.v9i2.8433

Pamungkas, I., Irawan, H. T., & Hasnita, H. (2023). Penggunaan Teknik Evaluasi Keandalan Mesin Pada Berbagai Industri di Indonesia: Literature Review. VOCATECH: Vocational Education and Technology Journal, 5(1), 22–32. https://doi.org/10.38038/vocatech.v5i1.128

Parakoso, D. A., & Marwan, M. (2025). Analisa Risk Priority Number (RPN) Terhadap Keandalan Komponen Mesin Thresher Menggunakan Metode FMEA di PT Indopalma Agro Persada. Jurnal Teknik Dan Industri}, 3(2), 141–153. https://.doi.org/10.22303/upu.1.1.2021.01-10

Pradana, K. R., & Ayende, A. (2025). Analisa Kegagalan Pada Gas Compressor AJAX DPC-360 Menggunakan Metode Failure Mode and Effect Analysis (FMEA). Prosiding Seminar Nasional Teknologi Energi Dan Mineral, 5(1), 749–760. https://doi.org/10.53026/prosidingsntem.v5i1.631

Prakoso, A., Kurniawan, R., & Mauluddin, F. (2021). Penanganan dan Analisa Kegagalan pada Bleed Air Leak Detection System Pesawat Airbus A330-300 di Hanggar 3 Pt. GMF Aeroasia. Jurnal Teknologi Dan Riset Terapan (JATRA), 3(2), 2685–4910. https://doi.org/10.30871/jatra.v3i2.3714

Prakoso, A., Setyo, B. C. G. A., Dermawan, D., Budiono, C. S., Lukito, I., & Kurniawan, R. (2024). Analisa kegagalan sistem beta pesawat Grob G 120TP-A dengan menggunakan metode Mean Time Between Failure. Jumantara Jurnal Manajemen Dan Teknologi Rekayasa, 3(2), 113–120. https://doi.org/10.28989/jumantara.v3i2.2378

Putra, A. A., & Firdaus, R. (2026). Prediction of A330 Hydraulic Component Life Based on MSG-3 and Reliability Data in XYZ Airline. Umsida - Universitas Muhammadiyah Sidoarjo, 1–7. https://doi.org/10.21070/ups.10400

Setiawan, F., Sofyan, E., & Hadi, M. (2021). Perencanaan Preventive Maintenance Ram Air Actuator pada Pesawat Boeing 737 Next Generation Menggunakan Metode Reliability di PT. GMF Aeroasia. Journal of Applied Mechanical Engineering and Renewable Energy, 1(2), 53–62. https://doi.org/10.52158/jamere.v1i2.246

Setiawan, F., Taaqbier, M., & Anhar, M. (2022). Perencanaan Preventive Maintenance Menggunakan Metode Reliability pada Electrical Sistem Auxiliary Power Unit Boeing 737-500. Injection: Indonesian Journal of Vocational Mechanical Engineering, 2(1), 1–8. https://doi.org/10.58466/injection.v2i1.279

Setiyanto, M. A., Cakra, W., & Herdianto, D. (2026). Analisis Penyebab Kegagalan Power Conditioning Module pada Sistem Thrust Reverser Engine Rolls-Royce Trent-700 pada Pesawat Airbus A330-300 di PT. GMF AeroAsia, Tbk. Elektro Dan Ilmu Komputer(TEKNIK), 6(1), 217–232. https://doi.org/10.55606/teknik.v6i1

Setyawan, A., Hotma, A., Tumanggor, U., Rizali, M., Sia, M., Ol, M., & Selvija Tambun, S. (2023). Analisis Keandalan Mesin Screw Press dengan Metode MTTF. Prosiding Seminar Nasional Teknik Industri (SENASTI), 1, 205–214. https://ojs.uajy.ac.id/index.php/SENASTI/article/view/7943

Syarifudin, A., & Putra, J. T. (2021). Analisa Risiko Kegagalan Komponen pada Excavator Komatsu 150LC dengan Metode FTA DAN FMEA DI PT. XY. Jurnal InTent, 4(2), 99–108. https://ejournal.lppm-unbaja.ac.id/index.php/intent/article/view/1759

Triardianto, D., & Siagian, R. M. (2025). Penerapan Mertode FMEA (Failure Mode and Effect Analysis) untuk Mengidentifikasi Kerusakan dan Usulan Kegiatan Perawatan Mesin Trinick di PT XYZ. Jurusan Teknologi Pertanian, 185–197. https://doi.org/https://doi.org/10.25047/nacia.v3i1.277

Vito Prisma, J., Said Salim Dahda, & Yanuar Pandu, N. (2025). Analisis Risiko Kegagalan Komponen Elektrikal Pada Mesin Overhead Crane Dengan Metode FMEA dan FTA. Jurnal Teknologi Dan Manajemen Industri Terapan, 4(4), 2045–2056. https://doi.org/10.55826/jtmit.v4i4.1353

Wildan, A., Amalia, P., Anugrah, A. B., Syariah, E., Islam, A., & Siliwangi, U. (2024). Efektivitas Metode Failure Mode And Effects Analysis di Bidang Manufaktur: Kajian Literatur. Jurnal Ilmiah Teknik Dan Manajemen Industri Jurnal Taguchi, 4(1), 14–30. https://doi.org/https://doi.org/10.46306/tgc.v4i1.151