Analisis Kelayakan Sistem Pentanahan pada Instalasi Listrik Gedung Menara Berdasarkan Puil 2011

Muhammad Wildan  Salama; Priyo Adi  Sesotyo; Ari Endang  Jayati

doi:10.31539/cjy2ds13

Authors

Muhammad Wildan Salama Universitas Semarang
Priyo Adi Sesotyo Universitas Semarang
Ari Endang Jayati Universitas Semarang

DOI:

https://doi.org/10.31539/cjy2ds13

Abstract

Abstract: This study aims to analyze the feasibility of the grounding system and leakage current in the electrical installation of the Menara Building based on the Indonesian Electrical Installation Standard (PUIL) 2011. The research employed a descriptive quantitative method through direct field measurements using a Kyoritsu 4200 Earth Clamp Tester to measure grounding resistance and a clamp meter to measure leakage current in the distribution panels. The results showed that the grounding resistance value of the transformer grounding system was 11.17 Ω, exceeding the standard limit of ≤ 5 Ω and therefore failing to meet the required standard. Leakage current measurements indicated that several distribution panels were classified as hazardous (>30 mA), particularly those located on the 2nd, 7th, 8th, and 9th floors. In conclusion, the grounding system and several distribution panels in the Menara Building are not yet feasible according to PUIL 2011 standards and require technical improvements to enhance the safety and reliability of the electrical installation system.

Keywords: Electrical Installation; Grounding; Leakage Current; PUIL 2011; Grounding System

References

Azmi, A., Ahmad, N. A., Yiew, L. K., & Abdul-Malek, Z. (2019). The Use of Enhancement Material In Grounding System: A review. Indonesian Journal of Electrical Engineering and Computer Science, 13(2), 453–460. https://doi.org/10.11591/ijeecs.v13.i2.pp453-460

Azwar Amat, M., Sifa, A., Dionisius, F., Endramawan, T., Apriyandi, D. D., & Rudiana. (2024). Effect of Insulation on The Resistance Spot Welds with An Electrode Parallel Gap Single-Sided Double Spot. Journal of Applied Mechanical Technology, 3(1), 1–9. https://doi.org/10.31884/journalofappliedmechanicaltechnology.v3i1.59

Badan Standardisasi Nasional. (2011). Persyaratan Umum Instalasi Listrik (PUIL) 2011. Badan Standardisasi Nasional. https://puil.bsn.go.id/

Bastian, M. B., Carman, W. D., & Woodhouse, D. J. (2015). Real-Time Monitoring of Substation Ground Potential Rise and Grounding System Impedance Using Power System Faults. IEEE Transactions on Industry Applications, 51(6), 5298–5304. https://doi.org/10.1109/TIA.2015.2425361

Do Nhu, Y., Giang, N. T., Cuong, N. X., Khanh, N. T., & Tuan, L. A. (2025). Impact of Power Electronics Devices on Leakage Current in Mine Electrical Systems: A case study in Vietnam. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 1, 55–62. https://doi.org/10.33271/nvngu/2025-1/055

Fagan, E. J., & Lee, R. H. (1970). The Use of Concrete-Enclosed Reinforcing Rods as Grounding Electrodes. IEEE Transactions on Industry and General Applications, IGA-6(4), 337–348. https://doi.org/10.1109/TIGA.1970.6818036

Fretes, R. de. (2022). Analisis Penyebab Kerusakan Transformator Menggunakan Metode RCA (Fishbone Diagram and 5-Why Analysis) di PT PLN (Persero) Kantor Pelayanan Kiandarat. ARIKA, 16(2), 117–128. https://doi.org/10.30598/arika.2022.16.2.117

Hendrawan, A., D, A. S., & Nasution, H. (2022). Beban Lebih Elektro Motor Pompa Ejektor pada Fresh Water Generator di Atas Kapal Motor Penumpang Mutiara Ferindo II. Jurnal Maritim Polimarin, 8(1), 71–77. https://ejournal.polimarin.ac.id/index.php/jurnalmaritim

Hsu, S.-H., Tzu, F.-M., Chang, W.-H., & Chen, Y.-D. (2024). Assessing High-Voltage Shore Connection Safety: an in-Depth Study of Grounding Practices In Shore Power Systems. Energies, 17(6), Article 1373. https://doi.org/10.3390/en17061373

International Electrotechnical Commission. (2005). IEC 60364-4-41: Low-voltage electrical installations—Part 4-41: Protection for safety—Protection against electric shock. International Electrotechnical Commission. https://webstore.iec.ch/publication/6038

International Electrotechnical Commission. (2024). IEC 61008-1: Residual Current Operated Circuit-Breakers Without Integral Overcurrent Protection for Household and Similar Uses (RCCBs)—Part 1: General rules. International Electrotechnical Commission. https://webstore.iec.ch/publication/97063

Kersting, W. H. (2000). Causes and Effects of Unbalanced Voltages Serving an Induction Motor. 2000 Rural Electric Power Conference. Papers Presented at the 44th Annual Conference, B3/1–B3/8. https://doi.org/10.1109/REPCON.2000.848042

Khan, A., & Ali, M. (2023). Three-Phase Load Balancing In Distribution Systems Using Load Sharing Technique. Engineering Proceedings, 46(1), Article 18. https://doi.org/10.3390/engproc2023046018

Luqmantoro, S. D., & Mucharam, R. (2022). Mutasi Transformator Distribusi di Blimbing Kota Malang penyulang Ampeldento N1314 dari 160 kVA ke 250 kVA untuk menghindari kerusakan akibat beban lebih. PoliGrid, 3(2), 57–62. https://ejournal.polinema.ac.id/index.php/poligrid

Mestriner, D., de Moura, R. A., Procopio, R., & de Oliveira Schroeder, M. A. (2021). Impact of Grounding Modeling on Lightning-Induced Voltages Evaluation In Distribution Lines. Applied Sciences, 11(7), Article 2931. https://doi.org/10.3390/app11072931

Mohamad Nasir, N. A. F., Ab Kadir, M. Z. A., Osman, M., Abd Rahman, M. S., Ungku Amirulddin, U. A., Mohd Nasir, M. S., Zaini, N. H., & Nik Ali, N. H. (2021). Impact of Earthing System Designs and Soil Characteristics on Tower Footing Impedance and Ground Potential Rise: A Modelling Approach for Sustainable Power Operation. Sustainability, 13(15), Article 8370. https://doi.org/10.3390/su13158370

Moselhy, A. H., Abdel-Aziz, A. M., Gilany, M., & Emam, A. (2020). Impact of First Tower Earthing Resistance on Fast Front Back-Flashover in A 66 Kv Transmission System. Energies, 13(18), Article 4663. https://doi.org/10.3390/en13184663

Ndungu, C., Nderu, J., Ngoo, L., & Hinga, P. (2017). A Study of The Root Causes of High Failure Rate of Distribution Transformer: A Case Study. The International Journal of Engineering and Science, 6(2), 14–18. https://doi.org/10.9790/1813-0602021418

Nti, I. K., Appiah, A. Y., & Nyarko-Boateng, O. (2020). Assessment and Prediction of Earthing Resistance in Domestic Installation. Engineering Reports, 2(1), e12090. https://doi.org/10.1002/eng2.12090

Parise, G. (2012). A New Summary on The IEC Protection Against Electric Shock. 48th IEEE Industrial & Commercial Power Systems Conference, 1–8. https://doi.org/10.1109/ICPS.2012.6229610

Parise, G., Parise, L., Martirano, L., Farber, A., & Katz, B. (2015). Grounding System Adequacy of HV/MV Substations in Areas With Reduced Accessibility. IEEE Transactions on Industry Applications, 51(3), 2038–2044. https://doi.org/10.1109/TIA.2014.2379952

Permal, N., Osman, M., Ariffin, A. M., & Kadir, M. Z. A. A. (2021). The Impact of Substation Grounding Grid Design Parameters in Non-Homogenous Soil to The Grid Safety Threshold Parameters. IEEE Access, 9, 37497–37509. https://doi.org/10.1109/ACCESS.2021.3063018

Permal, N., Osman, M., Kadir, M. Z. A. A., & Ariffin, A. M. (2020). Review of Substation Grounding System Behavior Under High Frequency and Transient Faults in Uniform Soil. IEEE Access, 8, 142468–142482. https://doi.org/10.1109/ACCESS.2020.3013657

Pillay, P., & Manyage, M. (2001). Definitions of Voltage Unbalance. IEEE Power Engineering Review, 21(5), 50–51. https://doi.org/10.1109/MPER.2001.4311391

Rahmani, I. N. (2026). Studi Perhitungan dan Pemilihan Rekomendasi Penurunan Susut Teknis pada Jaringan Tegangan Menengah PT PLN (Persero) UP3 Semarang. Journal of Authentic Research, 5(1), 53–65. https://doi.org/10.36312/2t56g702

Rau, N., & New, I. S. O. (2001). Power Engineering Letters. IEEE Power Engineering Review, 21(5), 49–51. https://doi.org/10.1109/39.919434

Reffin, M. S., Abdul Ali, A. W., Mohamad Nor, N., Ahmad, N. N., Abdullah, S. A. S., Mahmud, A., & Hanaffi, F. (2019). Seasonal Influences on The Impulse Characteristics of Grounding Systems for Tropical Countries. Energies, 12(7), Article 1334. https://doi.org/10.3390/en12071334

Reffin, M. S., Nor, N. M., Ahmad, N. N., & Abdullah, S. (2018). Performance of Practical Grounding Systems Under High Impulse Conditions. Energies, 11(11), Article 3187. https://doi.org/10.3390/en11113187

Sarker, M. T., Al Qwaid, M., Hossen, M. S., & Ramasamy, G. (2025). Performance Optimization of Grounding System for Multi-Voltage Electrical Installation. Applied Sciences, 15(15), Article 8600. https://doi.org/10.3390/app15158600

Sestasombut, P., & Ngaopitakkul, A. (2019). Evaluation of a Direct Lightning Strike to The 24 Kv Distribution Lines in Thailand. Energies, 12(16), Article 3193. https://doi.org/10.3390/en12163193

Sulistyanto, D. A., Hermawan, H., & Syakur, A. (2012). Analisis Arus Bocor dan Tegangan Flashover Pada Isolator Suspensi 20 Kv 3 Sirip dengan 4 Tipe Sirip Berbahan Polimer Resin Epoksi Silane Silika. Transient: Jurnal Ilmiah Teknik Elektro, 1(4), 226–232. https://ejournal3.undip.ac.id/index.php/transient/article/view/1263

Syukri, S., Murisal Asyadi, T., Muliadi, M., & Moesnadi, F. (2022). Analisa Pembebanan Transformator Distribusi 20 Kv pada Penyulang LS5 Gardu LSA 249. Jambura Journal of Electrical and Electronics Engineering, 4, 202–206. https://doi.org/10.37905/jjeee.v4i2.15467

Taryana, T., Kuntadi, C., Suprihartini, Y., & Sadiatmi, R. (2023). Faktor-Faktor yang Mempengaruhi Keandalan Instalasi Listrik. Jurnal Manajemen Pendidikan dan Ilmu Sosial, 4(1), 531–537. https://doi.org/10.38035/jmpis.v4i1.1457

Wibowo, A., Hermawan, H., & Syakur, A. (2015). Analisis Distorsi Harmonik Total Arus Bocor Permukaan Isolator Resin Epoksi Pengisi Silika Kondisi Kering dan Basah. Transmisi: Jurnal Ilmiah Teknik Elektro, 17(2), 98–107. https://ejournal.undip.ac.id/index.php/transmisi/article/view/8592

Wilis, G. R. (2014). Konduktor Aluminium pada Sistem Grounding. Jurnal Teknik Elektro, 9(2), 12–17.

Yinfan, J. (2013). Analysis of Factors Influencing Grounding Resistance. Industrial Safety and Environmental Protection. https://api.semanticscholar.org/CorpusID:113169311